Buying Tips of Fusion MS-RA70 Marine Entertainment System

The Fusion MS-RA70 Bluetooth pairing is a simple process to pair your Fusion MS-RA70 with any Bluetooth device. To do this:

a. Select Menu and then Discoverable to make the MS-RA70 visible to any Bluetooth device nearby. Please note that the system is only discoverable for two minutes. You may have to repeat the process if the system is not discovered in that time.

b. Enable Bluetooth on the device you want to pair with the system.

c. Bring the compatible device within 10m (33 ft) of the system so they can be paired.

d. On your Bluetooth device search for Bluetooth devices.

e. Select the MS-RA70 from the list of devices.

f. Follow the on-screen instructions to pair the devices. Your Bluetooth may ask you to confirm whether you want to connect to the Fusion MS-RA70 system. If you confirm, the devices are paired.

g. You may have to repeat the steps from a to f if the devices are not paired.

As you can see the Fusion MS-RA70 Bluetooth pairing is a very simple process.

Though the Fusion MS-RA70 does come with a detailed installation guide we suggest that you get a professional to install the system for you. In case you want to try a DIY installation, you can download the Fusion MS-RA70 Installation Manual from here. However, we do suggest that you get a professional to do the installation for you.

The Fusion MS-AR70 supports a maximum of 250 MP3 files in a folder that must be in the root directory of the USB drive. You cannot place a folder inside another folder. We suggest that you keep all your MP3 files in the root folder of the USB drive. Do not have more than 250 MP3files in the root folder.

Generally the Fusion MS-RA70 has a standard rating ranging from 10.6 to 16V. The consumption is for a standard system with 4 speakers attached. Any additional amplifiers or other accessories might add to the consumption. But the general consumption is 3A to 15A.

Most marine stereos have small openings on their cases due to which moisture may come in. In some cases, moist air may be drawn into the vents when the air inside the stereo cools down right after it’s turned off. The direct sunlight on front can bring moisture up against the screen, which causes fogging. However, turning on your stereo will remove the moisture. Fogging is not a problem. It will not harm your stereo because it is built to withstand the moist marine environment.